It  consists  of a small room to  which  a small air conditioner is connected the room is provided with a transparent front cover with a heater inside to simulate heat load in the room. Various measurements are provided so that performance of system that is COP of system, actual & theoretical cooling capacity of system ..

The unit consists of ducting fitted  with various  air conditioning components. Airflow is generated by an axial flow fan and in the airflow, heaters, cooling coil and steam humidifier connection is  provided. Cooling circuit consists of  a  hermetic compressor; air cooled condenser, thermostatic expansion valve and eva..

ACTUAL CUT SECTIONThe model will be suitably  sectioned to demonstrate  the internal construction  details showing  the minute  information,  and working  of the same,  the model will  be suitably painted  and  mounted  on  a  metal  or  wooden  base &&nbs..

Desert Cooler Trainer works on the principle of evaporative cooling. It is used mostly in the dry hot regions; it consists of a fan which sucks the air from atmosphere through the pads which are used in desert coolers very frequently. The difference in DBT & WBT at inlet and outlet  can  be  measured  hence  the&nb..

ACTUAL CUT SECTIONThe model will be suitably  sectioned to demonstrate  the internal construction  details showing  the minute  information,  and working  of the same,  the model will  be suitably painted  and  mounted  on  a  metal  or  wooden  base &&nbs..

The Plant uses ice can system. The cans filled with fresh wafer are kept in a tank in which brine is circulated. The brine is cooled by the refrigerant, which in turn cools the water in can and ice formation takes place.SPECIFICATIONS:  1.  Compressor :  hermetically sealed compressor using R 12 Refrigerant.  2.  Conde..

TRAINERHeat Pump is a device to pump heat from one source to another. The heat obtained by heat pump is  more than that could be obtained by direct  electrical heating. The  apparatus consists  of  refrigeration  system  with  water  cooled  shell  and coil  type evaporator and conden..

The model will be suitably  sectioned to  demonstrate  the internal construction  details showing  the minute  information,  and working  of the same,  the model will  be suitably painted  and  mounted  on  a  metal  or  wooden  base &  supplie..

This charging unit is fitted with motorised vacuum pump and other safety devices like pressure gauge. With the help of this charging unit students can charge the refrigerant gases into  compressor or store  the gas of  a  refrigerator  or  air  conditioner  inside the cylinder fitted inside ..

In old times refrigerant gas leakage was detected with the help of soap foam but with the help of refrigerant gas leak detector we can do the same job in more professional and reliable way...

It consists of refrigeration cycle of domestic refrigerator, it consists a hermetically sealed compressor,  air-cooled  condenser,  capillary  tube  and  a  natural  convection  type evaporator. The evaporator is fitted with a small heater to simulate different load conditions various measurements a..

This type of refrigerator was developed in 1925 by Munters and Battzervan when they were  studying  at Royal  Institute of Technology At Stockholm  for their  undergraduate course.  This  type  of  refrigerator  was  known  as  three  fluid  refrigeration  system..

GENERAL CYCLE TYPEThe unit consists of vapor  compression refrigeration cycle provided with  components normally used in refrigeration system SPECIFICATIONS:  1. Compressor- Hermetically sealed compressor, having capacity of 0.3 T.  2. Expansion Device s a) Thermostatic Expansion Valve    b) Capillary tube.&nbs..

ACTUAL CUT SECTIONThe model will be suitably  sectioned to demonstrate  the internal construction  details showing  the minute  information,  and working  of the same,  the model will  be suitably painted  and  mounted  on  a  metal  or  wooden  base &&nbs..

The apparatus consists of a storage water tank, embraced by evaporator coil of the cooling unit, sealed compressor, air-cooled condenser, a capillary tube as expansion device and an evaporator cell, stainless steel water tank .SPECIFICATIONS:  1.  a)  Compressor  the capacity of 1/3 ton of refrigeration using R-12 refrigera..