APPARATUS WOODEN FRAME..

SPECIFICATIONS:* The horizontal arm is of 75 cm and vertical arm is of 20 cm.* A wooden right angled lever with fulcrum at the angle* A device with a pioneer and roller is applied to magnify strains* complete with four weights of 0.5, 1, 1.5 and 2 kg ( one weight each)* Spring balance with adjustable wing nut is attached to the shorter arm...

SPECIFICATIONS:* two weights of ½ kg and a hanger of 1 kg.* It consists of a brass beam 9mm square one meter long* resting on the two knife edges fixed on heavy stands at* the bases of which are fitted leveling screws.* A central knife edge with hanger rests on the beam at the tp of which isprovided a pin.* Complete with a cast iron slotted weights..

SPECIFICATIONS:* an wooden graduated beam fitted into a* provided with notches al notches all along for hanger carrying weights.* With two set of iron painted slotted weights each* (apparatus for verification of law of Moments) consisting of* pivoted stirrup on a metal base, the top of the beam is* set containing four weights and one hanger of 200 ..

SPECIFICATIONS:* A) Worm Gear Type (1Ton)* (B) Spur Gear Type (1 Ton)* (C) Weston..

SPECIFICATIONS:* It consists of aluminum drum and three frictionless pulleys mounted on woodenboard* The pulleys can be fixed to give a lap of ¼ or ¾ full circumference of the drum,* complete with cord and two scale pans,* but without weights...

SPECIFICATIONS:· Wall-mounted unit to investigate relationship between tensions,* angle of lap and groove geometry.· Two reversible pulleys, and adjustable pulley with* belt angles of lap to be varied from 45° to 180° in 15° increments.* substantial rope..· Two load hangers,* weights set,..

SPECIFICATIONS:* Consisting of a wooden plane 90*18 cm having adjustment for setting the requiredangle precisely .* Complete with frictionless pulley ,* set of eight slide draws having bottom of different meterials .* Without weights.* linear and circular scale, pan, a wheeled trolley and..

SPECIFICATIONS:* worm gear of 40 teeth operated by a worm screw.* The spindle of the worm screw is provided with an effort wheel of 15 cmdiameter.* Weights are not included.* Consisting of a jack screw of 4 T.P.I.and double start carrying load platform.* The nut of the screw is fitted on a pedestal bearing and is keyed..

SPECIFICATIONS:* long compression springs of different thickness* Complete with 5 standard steel 20kg.* Consisting of cast iron bracket for attached to wall with* sliding vernier and scale...

SPECIFICATIONS:* Without weights.* one of iron and the other of wood each beam is 120 cm in length.* Consisting of two knife edge end supports,* a hanger with knife edge, and* a pointer moving over a graduated scale.* Complete with scale pan and two beams,..

SPECIFICATIONS:* but without weights.* the force of friction, with scale pan* four sliding boards of different area are provided to determine* Simple type having a wooden board 75*15 cm.* With glass surface,* a frictionless pulley is fixed to one end,..

SPECIFICATIONS:* It is very interesting to study different laws of friction with it.* Comprising of a 75*15 cm approx.* Wooden board and a frictionless pulley at one end,* a scale pan with the  fllowingaccessories but without weights...

SPECIFICATIONS:* the machine is capable of working* Strongly built frame mounted on a heavy cast iron base and* either single or double purchase.* Complete with cord and hooks.* Without weights.* the jib is 1.2 meter high and tapered at both ends,..

SPECIFICATIONS:* The unit comprises cast iron fram* provided with long hanger for weight , 2.5 kg slotted weight not included* a 10 kg helical compression spring slides in rod through two sliding rods..