Construction Of tray dryer 

The external Body is made of thick gauge M. S and Interior made of thick gauge sheets  304 Stainless Steel sheet. in between the space, resin bonded special quality fiber glass heat insulation slabs are provided. safety guards for fan blade & heaters are provided. The exterior is spray painted with automotive, Inner Chamber - 304, Outer Chamber M.S. STEEL . 

Fan & Motor 

According to models doors are provided with smooth moving hinges, latch catch & sealing gaskets. Well balanced large propeller type fan (S) fitted inside the chamber with suitable shaft & dual bearing with Electric motor (S) drive.

Heaters 

'U' type tubular heaters are provided inside the chamber for maximum heat transfer. Steam heated models are fitted with finned type steam radiators.

Controls Panel 

Control Panel box consists of contactor assembly, On & Off switch, Digital Controller neon lamps, operating push buttons are incorporated in the control Box.

Safety Features 

Built-in temp. deviation visual alarm. Safety thermostat for over shoot temp. cut off circuit to cut off the whole systems in case of malfunction. (only applicable to Microprocessor based models).

TRAYS: are made of Galvanised Steel

Body : 3” Gap is provided between tray and inner wall , so that the hot Air/Steam can be  easily and can come out through the air vent easily.

Feature at glance of tray dryer 

Designed for uniform circulation of hot air in the drying chamber.

Available in wide ranging models from 06 to 24 trays capacity.

Electrical or Steam or thermic fluid heating system available.

Temperature controlled by thermostat provided with the unit.

Steam Outlet Provided

Electrical control panel mounted on the upper body.

Trays are fabricated from aluminum (Stainless Steel Trays optional).

Inside Body STAINLESS STEEL  and outer M.S. STEEL powder coated